Aluminum Die Casting Parts are aluminum parts with different functions that are made by using different shapes of molds through certain processing. Its quality determines whether other equipment can operate normally, so how to judge whether it is a qualified product and how to inspect it. Don't worry, the following is an introduction to the inspection specifications for aluminum die-casting parts. I hope these instructions can help you understand what kind of aluminum parts are qualified.

1. It must be a complete individual without defects such as defects, cracks, bubbles, etc., and there must be no die phenomenon.

2. The gate, flash and other parts of the casting should be wiped frequently and kept clean at all times.

3. Defects that cannot appear on the processed surface include mixed impurities and sparse pores.

4. The height of the processing marks at the ejector rod of aluminum parts cannot exceed 0.2 mm.

These are just general inspection specifications for aluminum die castings. You can also select qualified products through these. If you want to deepen your understanding of it, welcome to visit our factory.

 

The following is the relevant information of our company: