Jul 03, 2022
Aluminum die casting mold is a widely used mold at present. Due to the long production cycle, large investment and high manufacturing precision, the cost is high, so it is hoped that the aluminum die has a long service life.
Jun 06, 2022
Injection molding companies have never used the precision molding process for the entire product development process. It is only used in small and rare occasions in the manufacturing process when product development requires an exceptionally precise form of plastic injection molding.
May 30, 2022
Creating products and services efficiently for the best advantages of the global market. Want to know the different ways of shaping various materials? Injection molding is a method of injection molding in which the heat-melted resin is injected into the mold cavity at high pressure and then cooled and cured to obtain injection molded products.
May 25, 2022
Under the trend of automobile lightweight, the application of aluminum alloy casting in automobile parts manufacturing will gradually increase.
May 20, 2022
After die casting molding, due to the mold flow is not smooth, resulting in flow marks and cold isolation phenomenon on the product, this product sandblasting or shot blasting will have the phenomenon of peeling, mainly poor filling and inclusion.
May 13, 2022
In the production process of gravity casting parts, air holes often appear because of improper operation or unskilled technology. Once air holes appear, the castings are often scrapped due to quality problems and the production cost is reduced. There are many reasons for air hole defects, many enterprises always feel at a loss when they encounter problems.
May 13, 2022
Generally speaking, the trial and production methods of die-casting molds are basically the same. Therefore, this article mainly uses the trial model to illustrate the method used, I hope it will be helpful to you.
Feb 18, 2022
This technique involves pouring liquid metal into the mold cavities under high pressure. There are two main types of process planning and many differences in aluminum die casting.
Jan 19, 2022
The tool walking standard is related to the tool back wear in a very small range. But the feed rate is large, the cutting temperature increases, and the rear edge wear is large. It is less harmful to the tool than the cutting speed.
Jan 12, 2022
When machining the spherical surface, especially the quadrant ball and curved surface, due to improper adjustment, it is easy to produce shoulder, shovel back and so on.