+86-574-87883895

Blog

Feb 18, 2022
This technique involves pouring liquid metal into the mold cavities under high pressure. There are two main types of process planning and many differences in aluminum die casting.
Jan 19, 2022
The tool walking standard is related to the tool back wear in a very small range. But the feed rate is large, the cutting temperature increases, and the rear edge wear is large. It is less harmful to the tool than the cutting speed.
Jan 12, 2022
When machining the spherical surface, especially the quadrant ball and curved surface, due to improper adjustment, it is easy to produce shoulder, shovel back and so on.
Aug 02, 2021
In the process of die casting production, the forming conditions of die casting die parts are extremely bad. This paper mainly introduces the use characteristics of die casting die.
Aug 02, 2021
The application of aluminum alloy die-casting is becoming more and more extensive. However, as a new type of casting process, the aluminum alloy die-casting penetration process is also widely used. Today, Huayin Die-casting will briefly introduce you to the advantages of the aluminum alloy die-casting penetration process?
Aug 02, 2021
The production of aluminum alloy template profiles requires mold forming, and molds play an important role in determining the quality of aluminum alloy template profiles. This article mainly describes the technical characteristics and requirements of die-casting alloys for aluminum alloy template profiles.
Aug 02, 2021
In the working process of aluminum alloy die-casting parts, there are often phenomena such as peeling or oxidation. The article mainly explains the reasons and solutions for its surface problems.
Aug 02, 2021
In the process of die-casting mold production and use, various problems often appear. The article lists three examples and gives corresponding solutions.
Aug 02, 2021
The correct use of aluminum alloy die-casting molds can not only extend the life of aluminum alloy die-casting molds, but also improve the quality of products. This article mainly introduces the precautions during the use of die-casting molds and common cooling methods.