Blog
Apr 28, 2023
The temperature of the aluminum die-casting mold should be determined based on the shape of the casting, the material of the molten metal, and other conditions.
Apr 28, 2023
Automotive casting parts refer to the load-bearing and load-bearing components in automobiles, which are closely related to automotive safety. Structural components often connect with other components to form high-strength frames that resist deformation. This type of structural component usually has characteristics such as large size, thin wall, and complex structure.
Sep 07, 2022
For the working environment, the aluminum alloy die casting molds needs to meet the following conditions
Aug 25, 2022
At about 10000 times, the mold should pay attention to tempering and stress relief. The residual hard force of internal force concentration processing has not been removed, and the thermal stress of die casting process has not been well removed.
Aug 15, 2022
Aluminum alloy materials in aluminum alloy die castings are mainly divided into three materials: aluminum-silicon alloy, aluminum-silicon-copper alloy, and aluminum-magnesium alloy:
Aug 04, 2022
The injection molding process mainly includes 6 stages including mold clamping, filling, pressure holding, cooling, mold opening and demoulding. These 6 stages directly determine the molding quality of the product, and these 6 stages are a complete continuous process. This chapter focuses on the four stages of filling, holding pressure, cooling, and demolding.
Jul 15, 2022
Both zinc die casting parts and aluminum die casting parts are widely used for industrial purposes. So what are the differences between the two types of die castings? The main difference lies in the characteristics and characteristics and applications of zinc alloy die casting and aluminum alloy.
Jul 03, 2022
Aluminum die casting mold is a widely used mold at present. Due to the long production cycle, large investment and high manufacturing precision, the cost is high, so it is hoped that the aluminum die has a long service life.
Jun 06, 2022
Injection molding companies have never used the precision molding process for the entire product development process. It is only used in small and rare occasions in the manufacturing process when product development requires an exceptionally precise form of plastic injection molding.
May 30, 2022
Creating products and services efficiently for the best advantages of the global market. Want to know the different ways of shaping various materials?
Injection molding is a method of injection molding in which the heat-melted resin is injected into the mold cavity at high pressure and then cooled and cured to obtain injection molded products.
May 25, 2022
Under the trend of automobile lightweight, the application of aluminum alloy casting in automobile parts manufacturing will gradually increase.
May 20, 2022
After die casting molding, due to the mold flow is not smooth, resulting in flow marks and cold isolation phenomenon on the product, this product sandblasting or shot blasting will have the phenomenon of peeling, mainly poor filling and inclusion.
May 13, 2022
In the production process of gravity casting parts, air holes often appear because of improper operation or unskilled technology. Once air holes appear, the castings are often scrapped due to quality problems and the production cost is reduced. There are many reasons for air hole defects, many enterprises always feel at a loss when they encounter problems.
May 13, 2022
Generally speaking, the trial and production methods of die-casting molds are basically the same. Therefore, this article mainly uses the trial model to illustrate the method used, I hope it will be helpful to you.
